Search results
"tag:procurve"
| Title and summary | Date/time | |
|---|---|---|
|
1
|
HP 2910al CPU spike due to 'Debug & Test' process
Last night our Cacti monitoring system sent out a bunch of warnings regarding the CPU usage on our HP ProCurve 2910al switch. The CPU utilization climbed to nearly 100%, and was well above 50% for a few hours. This had never occurred before. I logged ... |
08-Nov-2011 08:08:00 |
|
2
|
Upgrading the HP 2910al to a 10GbE Fiber Optic Internet Connection
We need more bandwidth. After technical discussions with our data center hosting+ISP, green.ch, we opted to run a 10 GbE fiber optic cable into our rack, rather than expand our 2Gbps LACP bond to 4Gbps which would have only been an intermediate step ... |
11-Apr-2011 13:47:00 |
|
3
|
Default IP address on HP ProCurve 2510G-24 and 2910al switches
Need to configure that new ProCurve 2510G-24 or 2910al that just showed up, factory fresh? The IP address is assigned via DHCP. I had to check with my DHCP server to work out which address it was. If there is no DHCP server, then it will self assign an ... |
08-Sep-2010 07:55:00 |
|
4
|
How to configure passive (dynamic) LACP ports on HP ProCurve switches
Here is the quick-n-dirty on how to configure HP ProCurve series switch ports for dynamic LACP. My direct experience so far is with the HP ProCurve 2510G-24 and the HP ProCurve 2910al-24, but it should translate to similar switches. From other examples ... |
25-Aug-2010 11:09:00 |